J. Potocnick, European Commission Recommendation on the definition of 777 nanomaterial, 2011.

G. Oberdorster, E. Oberdorster, and J. Oberdorster, Nanotoxicology: an emerging 779 discipline evolving from studies of ultrafine particles. Environmental Health 780 Perspectives, vol.113, pp.823-839, 2005.

O. Le-bihan, N. Shandilya, L. Gheerardyn, O. Guillon, E. Dore et al., 782 Investigation of the Release of Particles from a Nanocoated Product, p.783

. Nanoparticles, , vol.2, 2013.

P. Houdy, M. Lahmani, and F. Marano, Nanoethics and Nanotoxicology, p.785

G. Heidelberg, , 2011.

P. Kulkarni, P. A. Baron, and K. Willeke, Aerosol Measurement: Principle, Techniques 787 and Applications, 2011.

L. Y. Hsu and H. M. Chein, Evaluation of nanoparticle emission for TiO 2 nanopowder 789 coating materials, Nanoparticle Research, vol.9, issue.1, pp.157-163, 2007.

A. D. Maynard, Safe handling of nanotechnology, Nature, vol.444, issue.1, pp.267-269, 2006.

J. A. Shatkin, Nano risk analysis: advancing the science for nanomaterials risk 794 management, Risk Analysis, vol.30, issue.11, pp.1680-1687, 2011.

D. Göhler, A. Nogowski, P. Fiala, and M. Stintz, Nanoparticle release from 797 nanocomposites due to mechanical treatment at two stages of the life-cycle, Phys Conf, vol.798

. Ser, , vol.429, p.12045, 2013.

N. S. Allen, , p.800

C. Peinado, A. Minihan, and D. Aldcroft, Ageing and stabilisation of filled polymers: an 801 overview, Polymer Degradation and Stability, vol.61, issue.2, pp.114-120, 2004.

N. S. Allen, M. Edge, A. Ortega, G. Sandoval, C. M. Liauw et al., , p.804

R. Mcintyre, Degradation and stabilisation of polymers and coatings: nano 805 versus pigmentary titania particles, Polymer Degradation and Stability, vol.85, issue.3, pp.927-946, 2004.

A. Al-kattan, , p.808

B. Nowack, Release of TiO 2 from paints containing pigment-TiO 2 or nano-TiO 2 by 809 weathering, Environmental Science: Processes & Impacts, vol.15, pp.2186-2193, 2013.

R. Kaegi, A. Ulrich, B. Sinnet, R. Vonbank, A. Wichser et al., , p.812

S. Brunner, H. Vonmont, M. Burkhardt, and M. Boller, Synthetic TiO 2 nanoparticle 813 emission from exterior facades into the aquatic environment, Environmental Pollution, vol.814, issue.2, pp.233-239, 2008.

S. Hirth, L. Cena, G. Cox, Z. Tomovic, T. Peters et al., Scenarios and 816 methods that induce protruding or released CNTs after degradation of nanocomposite 817 materials, Nanoparticle Research, vol.15, issue.2, pp.1504-1518, 2013.

N. Shandilya, O. Le-bihan, and M. Morgeneyer, A review on the study of the generation of 820 (nano-) particles aerosols during the mechanical solicitation of materials

N. Nanomaterials, , 2014.

W. Wohlleben, , p.823

B. Vacano, V. Strauss, S. Treumann, K. Wiench, L. Ma-hock et al., On the 824 lifecycle of nanocomposites: comparing released fragments and their in vivo hazards 825 from three release mechanisms and four nanocomposites, Small, vol.7, issue.16, pp.2384-2395, 2011.

J. X. Bouillard, B. Mili, D. Moranviller, A. Vignes, O. Le-bihan et al., , p.828

J. A. Bomfim, E. Frejafon, and D. Fleury, Nanosafety by design: risks from 829

, Journal of Nanoparticle Research, vol.15, issue.1, pp.1519-1529, 2013.

G. Ounoughene, O. Le-bihan, C. Chivas-joly, C. Motzkus, C. Longuet et al., , p.832

A. Joubert, L. Le-coq, and J. Lopez-cuesta, Behavior and fate of Halloysite 833

, Nanotubes (HNTs) when incinerating PA6/HNTs nanocomposite

, Science & Technology, vol.49, issue.9, pp.5450-5457, 2015.

, The 5 principles of "Design for Safer Nanotechnology, Journal of Cleaner, vol.836

, Production, vol.18, issue.3, pp.285-289, 2010.

, Standard test method for the abrasion of organic coatings by the 838 Taber abradant, ASTM, vol.4060, 2007.

, Standard test methods for dry abrasion mar resistance of high 840 gloss coatings, ASTM, vol.6037, 1996.

, Standard test method for resistance of transparent plastics to 842 surface abrasion, ASTM D1044, 2008.

L. Golanski, A. Guiot, M. Pras, M. Malarde, and F. Tardif, Release-ability of nano fillers 844 from different nanomaterials (toward the acceptability of nanoproduct), Nanoparticle 845 Research, vol.14, issue.1, pp.962-970, 2012.

M. Vorbau, L. Hillemann, and M. Stintz, Method for the characterization of the abrasion 847 induced nanoparticle release into air from surface coatings, Journal of Aerosol Science, vol.848, issue.3, pp.209-217, 2009.

M. M. Hassan, H. Dylla, L. N. Mohammad, and T. Rupnow, Evaluation of the durability of 850 titanium dioxide photocatalyst coating for concrete pavement, p.851

, Building Materials, vol.24, issue.8, p.852, 2010.

M. Morgeneyer, N. Shandilya, Y. M. Chen, and O. Le-bihan, Use of a modified Taber 854 abrasion apparatus for investigating the complete stress state during abrasion and in855 process wear particle aerosol generation. Chemical Engineering Research & Design, vol.856, pp.251-256, 2015.

M. Morgeneyer, O. Le-bihan, and A. Ustache, Aguerre Chariol, O. Experimental study of 858 the aerosolization of fine alumina particles from bulk by a vortex shaker, vol.246, pp.583-589, 2013.

O. Le-bihan, M. Morgeneyer, N. Shandilya, O. Aguerre-chariol, C. Bressot et al., Handbook of Nanosafety: Measurement, Exposure and Toxicology, vol.861

U. Savolainen, K. Wu, Q. Van-tongeren, M. Brouwer, D. Berges et al., , 2014.

D. Göhler, M. Stintz, L. Hillemann, and M. Vorbau, Characterization of nanoparticle 865 release from surface coatings by the simulation of a sanding process, Annals of 866 Occupational Hygiene, vol.54, pp.615-624, 2010.

B. 30.-r'mili, O. Le-bihan, C. Dutouquet, O. Aguerre-charriol, and E. Frejafon, Sampling by 868 TEM grid filtration, Aerosol Science and Technology, vol.47, issue.7, 2013.

N. Shandilya, O. Le-bihan, C. Bressot, and M. Morgeneyer, , p.871

, Dioxide Nanoparticles from Building Materials to the Environment by Wear and 872

, Weather. Environmental Science and Technology, vol.49, issue.4, 2015.

, AFNOR, Paints and varnishes ? Methods of exposure to laboratory light sources ? Part 875 1: General guidance, 2012.

N. Shandilya, O. Le-bihan, C. Bressot, and M. Morgeneyer, Evaluation of the particle 877 aerosolization from n-TiO 2 photocatalytic nanocoatings under abrasion

. Nanomaterials, , 2014.

N. Shandilya, O. Le-bihan, and M. Morgeneyer, Effect of the Normal Load on the release 880 of aerosol wear particles during abrasion, Tribology Letters, vol.55, issue.2, pp.227-234, 2014.

L. R. White, Capillary rise in powders, J. Colloid Interface Science, vol.90, issue.2, 1982.

M. Murray, Cracking in coatings from colloidal dispersions: An industrial perspective

, Proceedings Rideal Lecture, 2009.

E. R. Dufresne, E. I. Corwin, N. A. Greenblatt, J. Ashmore, D. Y. Wang et al., , p.889

A. D. Cheng, J. X. Xie, X. S. Hutchinson, J. W. Weitz, and D. , Flow and fracture in 890 drying nanoparticle suspensions, Physics Review Letters, vol.91, 2003.

C. H. Hare, The degradation of coatings by ultraviolet light and electromagnetic 893 radiation, J. Protective Coatings and Linings, 1992.

M. S. Tirumkudulu and W. B. Russel, Cracking in drying latex films, Langmuir, vol.21, issue.11, 2005.

N. Shandilya, M. Morgeneyer, and O. Le-bihan, First development to model aerosol 899 emission from solid surfaces subjected to mechanical stresses: I. Development and 900 results, Journal of Aerosol Science, p.2015

N. Shandilya, M. Morgeneyer, and O. Le-bihan, First development to model aerosol 902 emission from solid surfaces subjected to mechanical stresses: II. Experiment-Theory 903 comparison, simulation and sensibility analysis, Journal of Aerosol Science, p.904, 2015.