Claystone phases mechanical properties identified from temperature and humidity controlled nano-indentation measurements, Proceedings of the International Symposium on Rock Mechanics, 2015. ,
Nano-indentation partially saturated argillite: experience device and measurements, Proceedings of EUROCK 2013. Rock Mechanics for Resources, Energy and Environment e The 2013 ISRM European Rock Mechanics Symposium ,
DOI : 10.1201/b15683-32
Experimental study of elastic properties of different constituents of partially saturated argillites using nano-indentation tests, Engineering Geology, vol.191, pp.61-70, 2015. ,
Mineralogical evolution of argillites in dehydrated-oxidised zones: the example of the argillitic walls from Tournemire tunnel, Comptes Rendus de l'Académie des Sciences e Series IIA e Earth and Planetary Science, vol.332, issue.10, pp.601-608, 2001. ,
): consequences for the mineralogy and crystal chemistry of clay minerals, Clay Minerals, vol.39, issue.2, pp.135-184, 2004. ,
Modeling of elastoplastic damage behavior of a claystone, International Journal of Plasticity, vol.19, issue.1, pp.23-45, 2003. ,
The granular nature of C-S-H, Journal of the Mechanics and Physics of Solids, vol.55, issue.1, pp.64-90, 2007. ,
Grid indentation analysis of composite microstructure and mechanics: principles and validation, Materials Science and Engineering: A, vol.430, issue.1, pp.189-202, 2006. ,
A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research, vol.1, issue.4, pp.601-610, 1986. ,
Impact of chemical weathering on micro/macromechanical properties of oolithic iron ore, International Journal of Rock Mechanics and Mining Sciences, vol.64, pp.236-345, 2013. ,
Composites with superspherical inhomogeneities, Philosophical Magazine Letters, vol.89, pp.439-51, 2009. ,
Petrofabric and mechanical properties of mudstones, Comptes Rendus de l'Académie des Sciences e Series IIA e Earth and Planetary Science, vol.338, issue.12e13, pp.882-91, 2006. ,
Saturated and unsaturated behaviour modelling of Meuse-Haute/Marne argillite, International Journal of Plasticity, vol.23, issue.5, pp.733-66, 2007. ,
URL : https://hal.archives-ouvertes.fr/hal-00685367
Elastoplastic damage modelling of desaturation and resaturation in argillites, International Journal for Numerical and Analytical Methods in Geomechanics, vol.34, issue.2, pp.187-220, 2010. ,
On quantitative characterization of microstructures and effective properties, International Journal of Solids and Structures, vol.42, issue.2, pp.309-345, 2005. ,
Influence of creep on water pressure measured from borehole tests in the Meuse/Haute-Marne Callovo-Oxfordian argillites, Physics and Chemistry of the Earth (Parts A/B/C), vol.32, issue.8e14, pp.917-938, 2008. ,
URL : https://hal.archives-ouvertes.fr/ineris-00147846
On the estimation of elastoplastic properties of rocks by indentation tests, Internal Journal of Rocks Mechanics and Mining Sciences, vol.46, issue.3, pp.635-677, 2009. ,
About the effect of relative humidity on the indentation response of Meuse/HauteeMarne argillite, Acta Geotechnica, vol.6, issue.3, pp.155-66, 2011. ,
Determination of the matrix indentation modulus of Meuse/Haute-Marne argillite, Applied Clay Science, vol.52, issue.3, pp.266-275, 2011. ,
Experimental investigation of the effect of temperature on the mechanical behavior of Tournemire shale, International Journal of Rock Mechanics and Mining Sciences, vol.70, pp.185-91, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01025642
Maxwell's far-field methodology predicting elastic properties of multiphase composites reinforced with aligned transversely isotropic spheroids, Philosophical Magazine, vol.90, pp.4175-207, 2010. ,
Surface roughness criteria for cement paste nano-indentation, Cement and Concrete Research, vol.38, issue.4, pp.467-76, 2008. ,
Etude du comportement rhéologique et modélisation de l'argilite de Tournemire: applications à la stabilité d'ouvrages souterrains, 1994. ,
Laboratory investigation of the mechanical behaviour of Tournemire shale, International Journal of Rocks Mechanics and Mining Sciences, vol.34, issue.1, pp.3-16, 1997. ,
, Rock e determination of the Young modulus and the Poisson's ratio, Association Francaise de Normalisation (NF), 2002.
The use of nano-and microinstrumented indentation tests to evaluate viscoelastic behavior of poly (vinylidene fluoride) (PVDF), Polymer Testing, vol.34, pp.10-16, 2014. ,
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.7, issue.6, pp.1564-83, 1992. ,
URL : https://hal.archives-ouvertes.fr/hal-01518596
Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology, Journal of Materials Research, vol.19, issue.1, pp.3-20, 2004. ,
Novel nanoindentation method for characterising multiphase materials, Thin Solid Films, vol.308, issue.309, pp.297-303, 1997. ,
Mechanical characterisation of the argillaceous Tournemire site (France), Proceedings of the International Conference on Rock Engineering Techniques for Site Characterisation, 1999. ,
centimétrique à micrométrique, porosité et diffusion des solutés dans l'argilite du CallovoOxfordien de Bure, 2008. ,
Effects of mineral distribution at mesoscopic scale on solute diffusion in a clayrich rock: example of the Callovo-Oxfordian mudstone, Water Resources Research, vol.48, issue.5, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00827642
Correlation between nanoindentation and tensile properties influence of the indentation size effect, Materials Science and Engineering: A, vol.361, issue.1, pp.377-84, 2003. ,
Origin of pore-water isotopic anomalies near fractures in the Tournemire shales, Physics and Chemistry of the Earth, vol.33, pp.87-94, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00408055
Shale testing and capillary phenomena, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.31, issue.5, pp.411-438, 1994. ,
DOI : 10.1016/0148-9062(94)90145-7
On the compliance contribution tensor for a concave superspherical pore, International Journal of Fracture, vol.177, issue.2, pp.199-206, 2012. ,
Generalization of Maxwell homogenization scheme for elastic material containing inhomogeneities of diverse shape, International Journal of Engineering Science, vol.64, pp.23-36, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-01315521
On computation of the compliance and stiffness contribution tensors of non-ellipsoidal inhomogeneities, International Journal of Solids and Structures, vol.45, issue.16, pp.4375-83, 2008. ,
A coupled elastoplastic damage model for semibrittle materials and extension to unsaturated conditions, Mechanics of Materials, vol.38, issue.3, pp.218-250, 2006. ,
DOI : 10.1016/j.mechmat.2005.07.002
URL : https://hal.archives-ouvertes.fr/hal-00021987
A micro-macro model for clayey rocks with a plastic compressible porous matrix, International Journal of Plasticity, vol.36, pp.64-85, 2012. ,
URL : https://hal.archives-ouvertes.fr/hal-00838422
Calculating the elastic modulus from nanoindentation and microindentation reload curves, Materials Characterization, vol.58, issue.4, pp.380-389, 2007. ,
Mineralogical characterization of the Tournemire argillite after in situ interaction with concretes, Waste Management, vol.26, issue.7, pp.789-800, 2006. ,
Experimental study of the influence of the degree of saturation on physical and mechanical properties in Tournemire shale (France), Applied Clay Science, vol.26, issue.1/4, pp.197-207, 2004. ,
The nanogranular origin of concrete creep: a nano-indentation investigation of microstructure and fundamental properties of calcium-silicate-hydrate, 2008. ,
Experimental study of the hydro-mechanical behaviour of the Callovo-Oxfordian argillite, Applied Clay Science, vol.26, issue.1/4, pp.325-361, 2004. ,